Difference between revisions of "Documentation"

From The Kinguard Project Wiki
Jump to: navigation, search
(SOURCE)
Line 1: Line 1:
 +
== Manual Source ==
 +
The manual for the is written in latex and located on [https://github.com/Kinguard/manual github]
 +
Ideally this should be adapted to better suit The Kinguard Project, so feel free to contribute.
 +
 +
In order for this to work, there are separate branches for different products and also a separate branch for a short one-pager.
 +
 
== OPI ==
 
== OPI ==
  
 +
=== Manual ===
 
The latest compiled version is available [https://download.openproducts.com/opi/documentation/quickstart.pdf as pdf here]
 
The latest compiled version is available [https://download.openproducts.com/opi/documentation/quickstart.pdf as pdf here]
 +
=== Schematics ===
 +
The schematics for OPI is available for download [https://download.openproducts.com/opi/documentation/OP-I_1B Rev B .pdf as pdf here]. It is in most aspects a copy of BeageBoneBlack, with the HDMI removed.
  
 
== KEEP ==
 
== KEEP ==
  
 +
=== Manual ===
 
The latest compiled version is available [https://download.openproducts.com/keep/documentation/keep-quickstart.pdf as pdf here]
 
The latest compiled version is available [https://download.openproducts.com/keep/documentation/keep-quickstart.pdf as pdf here]
  
== SOURCE ==
+
=== Schematics ===
The manual for the is written in latex and located on [https://github.com/Kinguard/manual github]
+
KEEP is using a SOM (System On Module) from SolidRun, with 2GB DDR RAM and 8GB eMMC. The carrier board is made by [https://www.openproducts.com OpenProducts]. Schematics and component placement for that board is available [https://download.openproducts.com/keep/documentation/KEEP_R1B.pdf as pdf here].
Ideally this should be adapted to better suit The Kinguard Project, so feel free to contribute.
 
  
In order for this to work, there are seperate branches for different products and also a separate branch for a short one-pager.
+
[https://download.openproducts.com/keep/documentation/KEEP_PCB.step A stp-model] for the PCBA is also available for download (~60MB).

Revision as of 12:20, 19 April 2018

Manual Source

The manual for the is written in latex and located on github Ideally this should be adapted to better suit The Kinguard Project, so feel free to contribute.

In order for this to work, there are separate branches for different products and also a separate branch for a short one-pager.

OPI

Manual

The latest compiled version is available as pdf here

Schematics

The schematics for OPI is available for download Rev B .pdf as pdf here. It is in most aspects a copy of BeageBoneBlack, with the HDMI removed.

KEEP

Manual

The latest compiled version is available as pdf here

Schematics

KEEP is using a SOM (System On Module) from SolidRun, with 2GB DDR RAM and 8GB eMMC. The carrier board is made by OpenProducts. Schematics and component placement for that board is available as pdf here.

A stp-model for the PCBA is also available for download (~60MB).