What does the LEDs mean?
What does the LEDs mean?
On the front of OPI there are three LEDs. Most common case is that all three are solid green.
LED position
Color
Meaning
Right
Green
The system has detected power and is booting
Middle
Green - solid
The operating system has finished booting
Middle
Green - heartbeat
Backup is ongoing
Left
Green - solid
Normal status, everything up and running
Left
Green - heartbeat
The system is waiting for the user to input the master password
Left
Red - heartbeat
The lastest backup has failed. Check the web interface, Backup configuration for further error message
Another way of looking at it is the combination of all LEDs
Left
Middle
Right
Meaning
on
on
on
Normal operation
off
flashing
on
The system is starting up
heartbeat
on
on
The system is requiring user input
on
heartbeat
on
Backup is ongoing
red heartbeat
on
on
The latest backup has failed
EDIT: Edited the bottom table after richards comment on the order of the LEDs
LED position
Color
Meaning
Right
Green
The system has detected power and is booting
Middle
Green - solid
The operating system has finished booting
Middle
Green - heartbeat
Backup is ongoing
Left
Green - solid
Normal status, everything up and running
Left
Green - heartbeat
The system is waiting for the user to input the master password
Left
Red - heartbeat
The lastest backup has failed. Check the web interface, Backup configuration for further error message
Another way of looking at it is the combination of all LEDs
Left
Middle
Right
Meaning
on
on
on
Normal operation
off
flashing
on
The system is starting up
heartbeat
on
on
The system is requiring user input
on
heartbeat
on
Backup is ongoing
red heartbeat
on
on
The latest backup has failed
EDIT: Edited the bottom table after richards comment on the order of the LEDs
Hi Krister,
The reason for this is that you have a unit from our beta-testing where the backup was not fully functional. Your unit created a faulty backup account, and then could not access that account.
You account has been reset and you should now have no problems accessing it. It was a known problem with the beta-units.
/PA
The reason for this is that you have a unit from our beta-testing where the backup was not fully functional. Your unit created a faulty backup account, and then could not access that account.
You account has been reset and you should now have no problems accessing it. It was a known problem with the beta-units.
/PA
Hi wagdog,
This problem sounds like one of our known issues with the backup. Could you please contact support@openproducts.com so that we could investigate this further?
/Tor
This problem sounds like one of our known issues with the backup. Could you please contact support@openproducts.com so that we could investigate this further?
/Tor