I got a {“connection” : “success” } when trying to set up OPI.

In this section we will put common questions that we get, so look here first if you have a question.
Post Reply
User avatar
pa
Posts: 73
Joined: Thu Aug 14, 2014 7:44 am

I got a {“connection” : “success” } when trying to set up OPI.

Post by pa » Thu Aug 14, 2014 12:01 pm

This is because the access was made using http, not https. This response is there because in the initial setup, our servers are checking what ports are available from the Internet to aid you in the setup. Checking access on port 80 (http port) is one of the tests, and this is the expected answer.

Post Reply