The KinGuard Project

<r>Hi Kivinen,<br/> <br/> Thanks for your feedback, there are things that are a bit rough around the corners...<br/> <br/> I am not sure why it did not time out for you, but it should have realized a failure and also given you a link pointing to the local name. OPI listens to <URL url="https://opi">...

<t>OPI will cycle backups and remove old ones in a scheme that will give you (one time has passed):<br/> <br/> A backup that is 0 to 1 cycles old (i.e, the most recent backup)<br/> A backup that is 1 to 3 cycles old<br/> A backup that is 3 to 7 cycles old<br/> A backup that is 7 to 14 cycles old<br/...

These is as gpeacock noted a power connector as well that can be used.
Same spec for power as for USB, 5V min 500mA, center pin is positive.

If you take a look on the label on the backside, there is a note on this as well.

/PA

Hi tehcog,

Np problem to send you your information. We do ask though that you send us mail on support@openproducts.com including the two email addresses.

/PA

<t>Hi Marcel,<br/> <br/> Most likely as you write that you activated the unit and also directly enabled backup is what caused the problem. The fix is in the repositories, but the unit needs to update first which it does nightly (UTC time)<br/> <br/> But as you say, we should add this to the document...

<r>Hi Marcel,<br/> <br/> The backup is solved, but it requires that your account on our side is reset, so please come back to us with your unit_id (activation code) so that we can reset the account. Please send this in an email to our support mail, <EMAIL email="support@openproducts.com">support@ope...

<t>Well, a good place to start is to make sure that your ISP allows other mail servers to connect to your OPI on port 25. This seems to work fine for you, since you use that as a sender address domain.<br/> <br/> What you need to look for somewhere that you can register your domain and that lets you...

Hi Hans,

You can use a standard smart phone charger, 5V, 500mA minimum.

/PA

Hi Geoff,

I has been a while, I just wanted to see if you have been able continue with you OPI?

/PA

<r>Hi,<br/> <br/> There really is not much to configure. Insert a USB mass storage device (USB stick or usb drive) into the USB port.<br/> Then as described in the quickstart <URL url="http://media.openproducts.com/quickstart.pdf">http://media.openproducts.com/quickstart.pdf</URL> on section 4.1, ju...